Nimbus WiMi5150A Wireless HDMI H.264 Encoder/Transmitter

The WiMi5150A Wireless HDMI H.264 Encoder/Transmitter from Nimbus pairs with an optional WiMi5150A receiver as a point-to-point Wi-Fi transmission system with a 4921′ range and only 30ms latency. With both units featuring built-in 5 GHz Wi-Fi, no additional network connection is required.

The transmitter encodes and sends up to a 1080p60 HDMI signal as an H.264 encoded signal, and the receiver decodes and outputs it as video. The transmitter is also capable of multicasting to up to three receivers at the same time over the same range and with the same near-zero delay.

The WiMi5150A transmitter features a single HDMI input. It offers a 1/4″-20 mounting thread on the bottom and comes with an L-series battery plate for on-camera portable operation. It also offers a 2-pin LEMO power connector. Batteries and power adapters are sold separately.

Key Features

4921′ range over 5 GHz Wi-Fi
30ms latency
Encodes and sends up to a 1080p60 HDMI signal in H.264 MPEG-4 Parts 10: AVC (decoded by optional receiver)
Up to UXGA VESA resolutions also supported
Multicasting to up to three WiMi5150A receivers
Baseline profile with level 4.2
USB firmware update port
L-series battery plate included
2-pin LEMO power input
1/4″-20 mounting thread

Included Items

Nimbus WiMi5150A Wireless HDMI H.264 Encoder/Transmitter
3 x 6 dBi Bar Antenna
Sony L-Series Battery Plate

Warrant: Limited 1-Year Manufacturer Warranty