Oxygen 3000D digital broadcast console with 10 faders. IN: 5 mic (+48V), 6 analog stereo, 1 digital, 1 aux, 2 USB-audio, Bluetooth. OUT: 8 analog, 1 digital, 2 USB-audio. 1 Telephone / 1 Telco. 5-band equalizer. Compressor. GPIO for Fader start and OnAir Lamp.
Oxygen 3000D Digital Mixing Console for Radio defined a new standard in the broadcast market. Characterized by an elegant design and compact size, Oxygen 3000D is suitable to be used as On Air Console and Production Console. Oxygen 3000D is based on digital technology with DSP audio processing to deliver high-end quality, latest features and flexibility with ease of use. Oxygen 3000D is the best seller in its category at the best quality/price ratio.
Oxygen 3000D is a powerful and compact unit featuring 10 faders, meters for each single channel, built-in 7” display for settings, wide range of connectivity and accessories in a rugged and classy steel chassis. Easy and reliable as the analogue mixing consoles, Oxygen 3000D adds the value of the digital engine that grants a near 0 latency ( < 0,7 ms I/O ) and plenty of advanced functions as the internal routing signal, customizable preset and easy recall, user defined smart keys, analog and digital I/O.
Oxygen 3000D Features
General
- Automatic firmware update via Internet
- Conditional Access (4-digit PIN)
- Save and recall EQ presets (up to 10)
- New real-time EQ algorithm with graphic
- Faster and more accurate Led Meters display
- Save and recall control panel configuration with 10 Snapshots
- Save and recall total console configuration. The configuration can be saved to internal memory (microSD), USB and PC (via WEB interface)
- User custom GPIs (e.g. Ring, Talkback, channel ON/OFF, etc.)
- User custom GPOs (e.g. Hook/ONAIR, Studio-Light, Control Room-Light)
- Selectable home page layouts for built-in 7″ display
- Selectable home page layouts for HDMI Output
- Gain adjustment knobs with adaptive speed
- Dimmable buttons light
- Adjustable fader ON/OFF threshold (from -50db to 0 db)
- CountUp/Timer/CountDown on studio and control room microphones on the built-in 7″ display
- A & B source names on the 7″ Display and HDMI Out
- MONO inputs assignable as EXT source
- Ducking / AutoFader assignable to all sources (automatic attenuation of music on speech)
- WEB UI with service features (Save, restore, update, logs, etc)
- New theme icons on display screens
Stereo Inputs
- Channel mode selection: STEREO, MONO, L, R, INV-L, INV-R, INV
Bluetooth Module
- With Bluetooth calls, PFL enables PRIVATE conversation mode
MIC-Mono Inputs
- Independent ON AIR Lights and Cut Off control, when opening Control Room and Studio microphones
- PFL button switches to private conversation on Hybrid/Telco/Bluetooth mode
- Enable TalkBack feature on any Studio or Control Room microphone
- Parametric Compressors/Expander (drive, threshold, attack time, release time) for MICROPHONE and MONO inputs
- Save and recall microphone presets including Compressor/Expander settings
- Phase inversion on microphone inputs
Telco Channels
- GPI and GPO management on all 5 Telco channels
- RING and HOOK on F1 key for each TELCO channels
- N-1 on Telco outputs for all BUS (PGM, SUB, AUX-1, and AUX-2)
Monitor Out
- Adjustable maximum Control Room and Studio speakers volume
- Adjustable maximum Control Room and Studio headphones volume
- Adjustable CUT or Attenuation mode (-40, -30, -20, -10 dB) on Control Room and Studio speakers
- Independent source selection (PGM, SUB, AUX1, AUX2, EXT) for control room and studio speakers, control room and studio headphones with or without PFL
- Independent Talk Back management on Control Room and Studio speakers
- Independent Talk Back management on Control Room, Studio and Guest headphones
- Selectable source for Guest headphones (PGM, SUB, AUX1, AUX2, EXT)
- Same source selection for Control Room and Studio headphones, with independent level
Highlights
General
- Fully Digital Broadcast Console
- Near 0 latency ( < 0,7 ms I/O)
- Signals routing
- 10-fader console
- 4+1 busses (PGM, SUB, Aux1, Aux2, PFL)
- User-definable Snapshot
- 5 band fully parametric EQ
- Dyn Processor on microphone inputs
- Webpage
- Customizable RGB colored buttons
- 7” Graphic Color Display
- Ctrl-Room and Studio Facilities
- A/B Fast source switch buttons
- 10 led meter bars for input source monitoring
- High Resolution led meter bars for outputs (164 leds)
- HDMI Out – Full HD connection for mixer monitor
- 2 Timers (Ctrl-Room and Studio microphones timers on HDMI Monitor)
- TalkBox for guest and presenter*
- Redundant PSU (optional)
Input Output
- 5 microphones inputs
- 8 stereo inputs
- 7 stereo outputs
- 1 built-in telephone hybrid,
- 1+4 telco interface with GPIO
- Bluetooth audio interface
- 1 digital In/Out (AES EBU)
- 2 USB audio interface
Inputs & Outputs
Microphone Inputs – Oxygen 3000D allows connection of XLR and RJ45 connector:
- Inputs replicated from XLR to RJ45: 2-3-4-5, balanced with + 48V Phantom and GPIO
- Telco: Microphone No. 5 mutually exclusive
Digital input line:
- Digital Input: 1 AESEBU Input on XLR
Analogue Outputs:
- Line Outputs: 6
- Balanced outputs: 4 Line out on XLR – PGM, SUB, AUX-1, AUX-2
- Unbalanced outputs: 2 Line out on RCA – REC-1, REC-2
Headphones and local monitor outputs:
- Balanced outputs: 2 line out on RJ45 for Studio Presenter and Studio Guest Headphones
- Unbalanced outputs: 2 Line out on RCA for Control Room and Studio Speaker
- Unbalanced outputs: 2 Line out on Jack 6.3 for Control Room and Studio Headphones
Analogue inputs lines:
- Line Inputs: 8
- Balanced inputs: 3 Line In on XLR
- Unbalanced Inputs: 4 Line on RCA
- Aux Input: 1 Line In Jack 3.5mm
Telephone hybrid and Telco:
- Telephone Hybrid: 1 POTS/PSTN telephone line with Line.In and Tel.Set connection
- Telco: 1 in/out N-1 to connect external telephone hybrid with control via TLC/GPIO
- 4 inputs/outputs N-1 on inputs STEREO 4/5 and outputs REC 1/2
Digital output:
- Digital Output: 1 AESEBU output on XLR
GPI/GPO:
- GPI: 12 in total, for Talk back, Telephone Hybrid or other features
- GPO: 10 total, to control OnAir lamps or Telephone Hybrid
Talk Box
It is a device dedicated to the presenter or guests.This TalkBox is very simple to connect to the On Air Console, actually its take 2 RJ45 cables of the length that needed to connect it to the mixer. It is possible to connect maximum up to 4 units.The TalkBox offer a direct connection of the microphone and relative On-Air light, it is also possible to directly connect the studio’s On-Air Light. The Talk Box has a headphone amplifier with two 6.3mm outputs.Through the two large backlit buttons it is possible to activate and deactivate your own microphone (On / Off / Cough) or enable Talk back to the console.
Details
USB audio interface – The USB audio interface allows to directly connect the PC to the Oxygen 3000D console, with no need for audio cards: infact the PC detects the console as a digital audio card with 2 stereo inputs and 2 stereo outputs for simultaneous playout and recording.
Telephone Hybrid and Telco – The built-in telephone hybrid allows direct connection of a telephone line POTS/PSTN on RJ-11C. The audio is processed via DSP that delivers a state-of-the-art audio processing. It’s also available a Telco N-1 in/out, to connect Oxygen 3000D to an external telephone hybrid. The output Telco N-1 is always available on XLR male, while the input receiving line is mutually shared with Mic-5. TLC commands are available on SubD connector with Hook and Ring interface for external telephone hybrid.4 inputs/outputs N-1 on inputs STEREO 4/5 and outputs REC 1/2 are also available without GPIO controls.
Bluetooth – Oxygen 3000D has a Bluetooth connection. This allows airing the calls made via Skype, Viber, WhatsApp or a normal phone calls by a Smartphone and Tablet. Oxygen 3000D has two modes of Bluetooth connection, bidirectional to support phone calls and mono monodirectional for streaming high quality stereo audio (A2DP): this last feature allows airing the music from smartphones and tablets.
Display 7″
The Oxygen 3000D has a 7 ” colour graphic display for displaying all the airing parameters and for configuring all the device feature. The large display combined with the 4 rotary knobs allow the fast and intuitive programming of all the mixer parameters.
HDMI output
The HDMI output on the Oxygen 3000 makes it possible to connect an external HD display monitor to the console. This feature provides information on settings and operating levels, including:
- Audio input source level
- 4+1 BUS output level
- A/B sources assigned of 10 channels
- Display OnAir sources
- Microphone On timer (control room & studio)
- Large Clock
- Audio output level (Loudspeakers & Headphones)
- OnAir microphone
- Telephone active
The HDMI interface also offers the possibility for radio stations to upload their own logo on the graphic interface.
Power supply
Universal Power on IEC Schuko cord, thanks to the universal power supply switching with working voltage between 90Vac and 264Vac and frequency between 50-60Hz. The PSU is able to adapt itself to the operating voltage of any country in the world. It’s also available redundant power supply (optional)
Technical Specifications
| Analog Balanced Stereo Inputs | |
|---|---|
| Connector | XLR Balanced – EMI Suppressed |
| Input Impedance | 10Kohm |
| Nominal Input Level (sensitivity) | 0dBu |
| Max Input Level (clipping point) | +18,5dBu |
| A/D conversion | 24 bit / 48 Khz |
| Frequency response | +/-0,5dB from 20Hz to 20kHz |
| Signal To Noise Ratio (referred to peak level) | >100dB |
| Stereo Separation (referred to peak level) | >90dB |
| THD+N | <0,002% |
| Analog Unbalanced Stereo Inputs | |
|---|---|
| Connector | RCA unbalanced – EMI Suppressed |
| Input Impedance | 10Kohm |
| Nominal Input Level (sensitivity) | 0dBu |
| Max Input Level (clipping point) | +18,5dBu |
| A/D conversion | 24 bit / 48 Khz |
| Signal To Noise Ratio (referred to peak level) | >90dB |
| Stereo Separation (referred to peak level) | >80dB |
| THD+N | <0,05% |
| Analog Balanced Microphone Inputs | |
|---|---|
| Connector | XLR Balanced – EMI Suppressed |
| Input Impedance | 2,4Kohm |
| Nominal Input Level (sensitivity) | -21dBu |
| Max Input Level (clipping point) | +7dBu |
| A/D conversion | 24 bit / 48 Khz |
| Signal To Noise Ratio (referred to peak level) | >90dB |
| THD+N | <0,01% |
| Analog Gain | Adjustable +0 ÷ +60dB (3dB step) |
| Phantom Power | +48V |
| Analog Balanced Telco Input (shared with MIC5, mutually exclusive) | |
|---|---|
| Connector | XLR Balanced – EMI Suppressed |
| Input Impedance | 2,4Kohm |
| Nominal Input Level (sensitivity) | 0dBu |
| Max Input Level (clipping point) | +18,5dBu |
| A/D conversion | 24 bit / 48 Khz |
| Signal To Noise Ratio (referred to peak level) | >90dB |
| THD+N | <0,01% |
| Analog Balanced Stereo Outputs | |
|---|---|
| Connector | XLR Balanced – EMI Suppressed |
| Output Impedance | 23ohm, nominal 600ohm |
| Nominal Output Level | 0dBu |
| Max Output Level (clipping point) | +18,5dBu |
| D/A conversion | 24 bit / 48 Khz |
| Signal To Noise Ratio (referred to peak level) | >100dB |
| Stereo Separation (referred to peak level) | >90dB |
| THD+N | <0,002% |
| Analog Unbalanced Stereo Outputs | |
|---|---|
| Connector | RCA Unbalanced – EMI Suppressed |
| Output Impedance | nominal 560ohm |
| Nominal Output Level | 0dBu |
| Max Output Level (clipping point) | +19dBu |
| D/A conversion | 24 bit / 48 Khz |
| Signal To Noise Ratio (referred to peak level) | >90dB |
| Stereo Separation (referred to peak level) | >80dB |
| THD+N | <0,05% |
| Analog Balanced Talkbox Outputs | |
|---|---|
| Connector | RJ45 balanced – EMI Suppressed |
| Output Impedance | 100ohm, nominal 600ohm |
| Nominal Output Level | 0dBu |
| Max Output Level (clipping point) | +14dBu |
| D/A conversion | 24 bit / 48 Khz |
| Signal To Noise Ratio (referred to peak level) | >100dB |
| Stereo Separation (referred to peak level) | >90dB |
| THD+N | <0,05% |
| Analog Balanced Telco Output | |
|---|---|
| Connector | XLR Balanced – EMI Suppressed |
| Output Impedance | 23ohm, nominal 600ohm |
| Nominal Output Level | 0dBu |
| Max Output Level (clipping point) | +18,5dBu |
| D/A conversion | 24 bit / 48 Khz |
| Signal To Noise Ratio (referred to peak level) | >100dB |
| THD+N | <0,002% |
| Digital Input | |
|---|---|
| Connector | Balanced on 1 XLR – EMI Suppressed |
| Input Impedance | 110Ω |
| Standard | AES3 |
| Audio Sample Rate | 32/44.1/48KHz with aSRC |
| Resolution | 24 bit |
| Dynamic Range (Converter Values) | 124dB |
| Digital Output | |
|---|---|
| Connector | Balanced on 1 XLR – EMI Suppressed |
| Input Impedance | 110Ω |
| Standard | AES3 |
| Audio Sample Rate | 48KHz |
| Resolution | 24 bit |
| Dynamic Range (Converter Values) | 124dB |
| USB Audio Digital I/O | |
|---|---|
| Connector | USB Type B – EMI Suppressed |
| Playback And Recording Sample Rate | 48KHz fixed |
| Resolution | 16 bit |
| Channel count | 1 Stereo play, 1 stereo rec for each USB interface |
| PSTN Interface | |
|---|---|
| Connector | RJ11 |
| Transhybrid loss | >36dB |
| System | |
|---|---|
| Audio Core | Analog Devices ADAU1452 32bit 294MHz fixed point DSP |
| Audio CODECs | Cirrus CS42448 24bit/192kHz |
| System Core | Allwinner A20 dual core cortex-A7 at 800MHz, 1GB RAM |
| System display | 7” TFT 800×480 LCD |
| LAN Connection | RJ45 – 100Mbit |
| Nominal Delay (analog input to analog output) | 0,7ms |
| GPIO Inputs/Outputs | 12 GPI / 10 GPO |
| Communication Port | 2xUSB type-A, 2xUSB type-B , 1xLAN, 1xHDMI |
| Operating Temperature | 0°C ÷ 40°C |
| PSU (optionally redundant) | |
|---|---|
| Power Supply | 90-260 Vac / 47-63 Hz 45W |
| Dimensions | |
|---|---|
| Dimensions (W; H; D) | 660mm; 142mm; 540mm |
| Weight | < 20Kg |
Dimensions
Reviews
There are no reviews yet.